HDZone
Relatii cu clientii - Suport 7/7
sunati-ne la
0726.744.911
sau lasati-ne un mesaj la
vanzari@hdzone.roAmplificator stereo integrat Onkyo A-5VL
Garantie: 24 luni
Disponibilitate: Info stoc
Pret: 1499 Lei
* Pretul contine TVA si timbrul verde
Integrated Stereo Amplifier
A-5VL
Sophisticated Audio Processing in a Space-Saving Design
Beneath the A-5VL’s slim and elegant exterior lies a surprising amount of amplification muscle. You might wonder how Onkyo managed to incorporate the functionality of a pre- and power amp into such a slender integrated package. The key is the A-5VL’s extremely energy-efficient design. Because it produces much less heat than a typical amplifier, the A-5VL requires only a small heat sink. This leaves
ample space for a range of precision-crafted audiophile-grade parts, such as specially audio-tuned capacitors and thick, low-impedance copper bus plates. The A-5VL employs Onkyo’s exclusive VLSC™ technology to ensure a smooth, pulse noise-free signal during conversion from digital to analog. You’ll enjoy precise and faithful reproduction of any audio source, whether it’s a CD, a tuner, or a turntable. As the A-5VL is also compatible with Onkyo’s optional RI (remote interactive) Docks for the iPod®, you also have the convenience of controlling playback of your iPod via the amplifier’s remote controller.
Special Features
- Burr-Brown 192 kHz/24-Bit DACs
Product Features
| Power Output | - |
| 8 ohms | 2 x 40 W/Ch |
| Dynamic Power | - |
| 3 ohms | 115 W |
| 4 ohms | 90 W |
| 8 ohms | 45 W |
| Audio in/out | 4/1 |
| Phono input | MM/MC |
| Exclusive Vector Linear (VL) Digital technology | |
| Optimum Gain Volume Circuitry | |
| All discrete output stage circuitry | |
| Low-impedance, thick bus plate | |
| Audiophile-grade capacitor | |
| Precision motor-driven volume control | |
| Tone Control (Bass, Treble On/Off) | |
| Pure direct mode | |
| Discrete phono equalizer circuitry | |
| High-rigidity, anti-resonant chassis | |
| Speaker A/B posts | |
| Compatible with Remote Interactive Dock for the iPod | |
| RI (Remote Interactive) remote control | |
| Banana Plug Speaker Terminals |
Product Specifications
Amplifier Section |
|
| Power Output | 40 W/Ch (8 ohms, 1kHz, 2 channels driven, FTC) |
| Dynamic Power | - |
| 3 ohms, Front | 115 W/Ch |
| 4 ohms, Front | 90 W/Ch |
| 8 ohms, Front | 45 W/Ch |
| Total Harmonic Distortion | 0.08 % |
| Damping Factor | 60 (Front, 1 kHz, 8 ohms) |
| Input Sensitivity and Impedance | - |
| Phono MM | 2.4 mV/50 k-ohms |
| CD | 200 mV/50 k-ohms |
| Output Level and Impedance | - |
| Rec out | 200 mV/2.2 k-ohms |
| Phono Overload | 60 mV (MM, 1 kHz, 0.5 %) |
| Frequency Response | 5 Hz-60 kHz (+ 1, - 3 dB, CD) |
| Tone Control | - |
| Bass | + 14 dB, - 14 dB, 100 Hz |
| Treble | + 14 dB, - 14 dB, 20 kHz |
| Signal-to-Noise Ratio | 100 dB (CD, IHF-A), 70 dB (Phono, IHF-A) |
| Speaker Impedance | 2 ohms-16 ohms |
General |
|
| Power Supply | AC 120 V, 60 Hz |
| Power Consumption | 110 W |
| Standby Power Consumption | 0.3 W |
| Dimensions (W x H x D) | 17-1/8" x 3-1/8" x 13-3/8"/435 x 80 x 340 mm |
| Weight | 22.5 lbs./10.2 kg |
Nota:
Fotografia prezentata are caracter informativ si poate contine accesorii ce nu sunt incluse in pachetul standard al produsului.
Specificatiile tehnice sunt informative, pot fi schimbate fara instiintare prealabila si nu constituie obligativitate contractuala.



